021-88453224


در بین هزاران قطعه ای که تاکنون تامین کرده ایم جستجو کنید‎
تجهزات دوار، برق و ابزاردقیق، شیرآلات، هیدرولیک و پنوماتیک، ماشین آلات سنگین‎
  • MENZEL G34685 MEBGVQ 818 - X Series wound DC - Mill - Motor KM-E

DC MOTOR, TOTALLY ENCLOS. NON-VENTILATED, 250 HP, 230 VDC, 885 A, 410 RPM, MOMENT OF INERTIA (GD2): 88 KG-M2, WINDING: SERIES, TIME RATING: 1HR,TEMP.RISE: 75 DEG.C, AMBIENT TEMPERATURE: 65 DEG.C, INSUL. CLASS: H,WITH 2-ND SHAFT END

TAPER SHAFTS: 1/9.6, FRAME SIZE: 450.85 MM, BEARING NO.: 2-NJ 328, FOR MAIN HOIST APLICATION(HOT METAL HANDLING CRANE), W: 3900 KG, MITSUBISHI FRAME NO. KM818, TYPE: KM-E

G34685 MEBGVQ 818 - X 
Series wound DC - Mill - Motor
Make:Menzel
Condition:New
Power [kW]:187,00
Duty:S2 60 min
Voltage [V]:230
Rated speed [min-1]:410
Number of poles:04
Direction of rotation:Both
Nominal current [A] ~890,00
Mounting:IM 1004 (IM B 3)
Protection:IP 44
Cooling:IC 410
Lubrication:Grease
Balancing:Half Key
Insulation class:H
Moment of inertia [kgm-2]:212,0000
Weight [kg]:3600
Colour:RAL7016
frame size 818 according A.I.S.E. - standards
(laminated execution, non split)
with compensating winding
shaft height H = 450,85 mm
with PT 100 - sensors (RTD) in stator windings (3 wire execution)
with PT 100 - sensors (BTD) in bearings (3 wire execution)
with terminal box position on the left side ==> look at the NDE - Side (commutator side)
totally enclosed not ventilated
with 2 identical conical shaft ends
diameter: ==> 127 mm
cone: ==> 1 : 9,6
thread: ==> Ø 88,9 mm screwed 8 TPI
the 2. conical shaft end at the commutator side is covered with a special tube for safety
standard shaft material
standard bearings
for dir. coupling
ambient temparature range: +5 °C ---- +65 °C
temperature rise: 100 Deg C over ambient
max. 1000 m a.s.l.
indoor installation
feet holes:
A = 760 mm , B = 990 mm , C + E = 401 mm , K = Ø 47 mm
max. total length: 1792 mm (included both shaft ends)
overload capacity according AISE - Standard

Write a review

Note: HTML is not translated!
    Bad           Good

MENZEL G34685 MEBGVQ 818 - X Series wound DC - Mill - Motor KM-E

  • Product Code: G34685 MEBGVQ 818 - X Series wound DC - Mill - Motor KM-E
  • Availability: In Stock
  • availability : 3-8 week
  • price : send inquiry

  • $0.00

  • Ex Tax: $0.00

Enquire now for a quick price

0 reviews / Write a review

Tags: MENZEL, G34685 MEBGVQ 818 - X, Series wound DC - Mill - Motor, KM-E, 250 HP, 230 VDC, 885 A, 410 RPM, 88 KG-M2, 1HR, 75 DEG.C, 5 DEG.C, H, 1/9.6, 450.85 MM, 2-NJ 328, 3900 KG, KM818, 187, 00, S2 60 min