T2844.00

DSS1-MF990.29-7DPT20-DHZM3-C6265BA1-ZZAZZZZZ
LABEL-PG1DE-ZZZZZ-
H990.29-DN0802B1C1C1C2150076C1ZZZ
DPT-20-IDB-DDZBZ-H1-BBD250-XSV1-ZZZZA-ZZ
Differential Pressure Transmitter DPT-20
Specifications according to data sheet: PE 86.22
Electrical approval: IECEx/ATEX
Ignition protection type: Ex d - explosion proof
Zone: Zone 1 attached to zone 0 gas [Ex d IIC T6 Ga/Gb]
Housing material: Aluminum double chamber
Case version: compact / IP66/IP68 (0.2bar); NEMA 6P
Digital Display: with integrated indicating/adjustment module (top)
Output signal: 4...20 mA, 2-wire, HART
Electrical connection: M20x1,5 / cable gland brass nickel plated (ø6-12mm)
Maximal working pressure: 160 bar (16 MPa / 2400 psi)
Measuring range: -500 ... +500 mbar
Process connection/mounting/material/venting: single side diaphram seal and 1/4-18 NPT IEC61518 /
7/16-20 UNF / 316L with valve
Diaphragm material: 316L
Sealing material (temperature range): FKM (-20 ... +85 °C)
Accuracy: 0.1 % of span
Filling of sensor: Silicone oil for regular applications (KN2)
Operating modes: Level measurement
Scaling unit DP-measurement: cm
Lower scaling value DP: 0 cm
Upper scaling value DP: 360.0
Density value: 0.948
Density unit: kg/dm3
Linearization curve: linear
Damping [s]: 1 s (default setting)
Output signal low level in %: 0%
output signal high level in %: 100%
Displayed value: level (acc. scaling)
Diaphragm seal system with 1 diaphragm seal
Assembly specification High-Side: 150 mm assembly, horizontal with square tube
System fill fluid: KN 2 Silicone oil for general applications
Servicecategory: Basic Service according to Technical Information IN 00.25
Process temperature min.: + 21°C (room temperature)
Process temperature max.: + 80°C
Ambient temperature pressure meas. min: + 10°C
Ambient temperature pressure meas. max: + 40°C

Diaphragm seal, flange type, extended diaphragm
Specifications according to data sheet: DS 99.29
Diaphragm seal: Model 990.29
Diaphragm seal: Model 990.29
Process connection standard: following EN 1092-1
Process connection: DN 80
Nominal pressure rating: PN 16
Sealing face: form B1
Upper body material / main body material: Stainless steel 1.4404 (316L); UNS S31603
Sealing face material: Stainless steel 1.4404 (316L); UNS S31603
Diaphragm material: Stainless steel 1.4435 (316L); UNS S31603
Extension length: 150.0 mm
Extension diameter: 76.0 mm
Extension material: Stainless steel 1.4404 (316L); UNS31603